Stone bathrooms have become a popular choice in modern home design with their natural texture, luxurious visual effects and durability. In the design and construction process, details are crucial, not only to meet the functional needs of daily life, but also to improve the overall quality of life. This article will introduce in detail the design points, waterproofing treatment and ultra-thin wall construction of stone bathrooms to help you create a beautiful and practical stone bathroom.
1. Shower Design Details
In the design of stone bathrooms, the shower room is a key area and requires special attention to details. First, the height of the faucet and shower should be set between 900~1100mm to adapt to the usage habits of most people. The shower position should be aligned with the center of the flat wall as much as possible to ensure comfort and convenience during use. Secondly, the floor drain should be set close to the shower, and the position should be either in the center of the wall or in the two corners to facilitate the overall ground slope, and the slope should be ≥1%. At the same time, it is recommended to set drainage grooves around the shower floor, and the drainage grooves should be ≥10mm lower than the shower floor. In addition, the shower floor should be treated with anti-slip treatment, and the stone surface with acid-washed or flame-burned surface treatment should be used to ensure the anti-slip effect.
2. Waterproof treatment
Waterproof treatment is a crucial link in the construction of stone bathrooms. After the partition wall is completed in the shower room, the structural water-tightness acceptance is required. After the acceptance is qualified, waterproofing is done once on the structural surface, and the second waterproofing needs to be done after the ground leveling layer is completed. The height of both waterproofing needs to be 1800mm. In order to ensure the waterproof effect and avoid the situation where the moisture in the cement mortar leveling layer penetrates into the dry area of the bathroom, it is recommended to make C20 concrete counter-ridges with a higher density than cement mortar at the junction of the bathroom and the corridor, and the dry area and wet area of the bathroom. The height requirements of the waterproof layer vary according to the functional differences between the shower room and other bathrooms: in the space with a shower, the height of the waterproof layer needs to be 1800mm; in other bathroom spaces without shower equipment, the waterproofing only needs to be 300mm.
3. Ultra-thin wall construction
In order to maximize the use of indoor space, ultra-thin walls are often used in the design of stone bathrooms. Usually, designers will try to compress the wall thickness in the space as much as possible while ensuring sound insulation, especially the partition wall of the bathroom. The specific construction process of the ultra-thin wall is as follows: First, use 40mm×40mm square tubes to make the wall skeleton to ensure the stability and bearing capacity of the structure; then pour fine stone concrete to turn the steel frame wall into a solid cement wall; then make a waterproof layer on the cement wall; finally, stick the stone on the finished cement wall to complete the final wall finish. The role of the wire mesh is to adhere to the cement and enhance the overall structure of the wall. It can also be made into a wall by welding steel plates and then brushing the cement surface.
4. Design and construction suggestions
When designing a stone bathroom, it is necessary to comprehensively consider functionality, aesthetics and practicality. In terms of color matching, choose the stone color and texture that are coordinated with the overall decoration style. Light-colored stone can create a bright and spacious sense of space, while dark-colored stone is more luxurious and stable. In terms of space utilization, the layout of the bathroom should be reasonably planned to make full use of every inch of space. For example, the use of wall-mounted toilets and wash basins can save space and enhance the overall visual effect. In terms of lighting design, the lighting should be arranged reasonably to ensure that the bathroom has enough light. In addition to the main lighting, local lighting can also be set up, such as mirror lights and waterproof lights in the shower area, to enhance the user experience. During the construction process, high-quality stone and waterproof materials should be selected, the construction quality should be strictly controlled, and attention should be paid to construction details, such as the installation of floor drains and the design of drainage grooves. These details not only affect the use function, but also affect the overall aesthetics.
5. Conclusion
Stone bathrooms have become a popular choice in modern home design with their natural texture, luxurious visual effects and durability. Through reasonable design and construction, stone bathrooms can not only meet the functional needs of daily life, but also improve the overall quality of life. During the design and construction process, it is necessary to pay attention to the design details of the shower room, waterproof treatment, and ultra-thin wall construction to ensure that every link achieves the best effect. I hope that the introduction of this article can provide you with valuable references to help you build a beautiful and practical stone bathroom.
